Acerbis Brazel Protector PHS with built-in motohodines

A foam bar guard equipped with a microcomputer with clock, stopwatch and timer functions, plus a pocket for storing car keys. Extremely light, washable, easy installation - velcro fastening. Three counters: 1 cumulative (non-resettable) and 2 partial resettable. The hour meter is activated automatically by engine vibration when the motorcycle is moving and has a lock function that prevents the hour meter from being activated while the motorcycle is being transported, long press the S button before LOC appears and the clock turns off into transport mode. Waterproof and no need for external power supply, battery included.

• With a small pocket (75 x 50 x 40 mm) for storing car keys; paper towels, etc. with zippers.

• TPR cover with excellent tear resistance.

• Made of foam material to reduce shock in the event of an impact

• Extremely light

• Velcro fastening

• Permanent washable graphics

• Watches

• Stopwatches

• Timer

• Counter #3: 1 cumulative (non-resettable) and 2 partial resettable

• SVC: Notification of scheduled maintenance

• The hour counter is activated automatically by engine vibrations when the motorcycle moves.

• Lockout function to prevent the hour meter from being activated while the motorcycle is being transported, long press the S button before the word LOC appears and the clock will turn off into transport mode.

• Waterproof - IP68

• No need for external power supply - Battery is included in the package

Hold "S"+"M" to turn on the clock. The "M" button is used to switch functions.

Hold "S" to activate settings, click "S" to add units. Press "M" to toggle between minute/hour. After setting the time, wait without pressing, or press "M"+"S" to save the setting.

Press "S" to activate the stopwatch. A subsequent press of "S" will stop the time. Holding "S" will reset the stopwatch.

Hold "S" to activate the setting. Press "S" to add a unit. "M" is used to switch between hour and minute. After selecting the time, wait until the selection is confirmed. Timer is started/stopped by pressing "S". Restart is by pressing "S"

Total time of the motorcycle started. It loads automatically with the clock on. Cannot be reset.

Current elapsed time. Can be restored. Holding "S" will restart the time.

Maintenance interval. Holding down "S" will activate the menu settings. "M" and "S" buttons move units up and down. After choosing the time (in hours), just do not press anything and the time will be set. After the time has elapsed, the display will flash.

Holding "S" activates the vibration sensitivity menu. Use "M" and "S" to move through the menu, how sensitive you want the clock to be

Holding "M"+"S" will show "Loc" on the clock and then turn off the clock. They do not switch off automatically and the clock must be switched off during transport. When the clock is switched on, it can also load MTH on e.g. a card.

Because the Acerbis brand has been on the world market since 1973 and is constantly developing new innovative and protective products with the same enthusiasm and passion as at the time of its creation.

And therefore it is a guarantee of high quality and sophistication of the product. It guarantees the quality of its goods and will not allow them to fail to meet the conditions required of them (homologation, water resistance, absorbency, strength, color, elasticity, breathability...)

All products are developed and tested in its testing facilities and consulted with leading motocross riders to meet all parameters. Not only in terms of safety, but also comfortable, trouble-free driving. They are made of high-quality material, in the most modern design, corresponding to the world trend.