motorbike engine oil additive - Wolfram NANO coating 30ml

Due to the reduction of passive resistances, the efficiency (power increase) of the motor functionality is increased. In high-mileage motorcycles, there is also an increase in performance due to the self-repairing properties (surface smoothing) of IF-WS2 particles.

Tests from Brno University of Technology confirm excellent efficiency - reducing wear by almost 9 times. As a result, wherever you use IF-WS2 additives (engine and gearbox), you will substantially extend the life of the engine/transmission without service costs. Overall, you will significantly reduce operating costs.

IF-WS2 particles have high thermal stability in the range of -273°C to +500°C. The additives have repeatedly proven their high efficiency in racing engines.

IF-WS2 nanoparticles are among the most lubricating materials known. As a result, the additives reduce the coefficient of friction (reducing passive resistances) and thus reduce fuel consumption. In addition, in older engines, the surfaces are smoothed (rough spots are sealed) and this also saves PHM and especially oil in engines that have increased consumption.

Store in a warm place before use, or warm in warm water, shake and pour into a warm (not a requirement) engine. After application, you can drive immediately, or start for at least a few minutes. IF-WS2 additives are always applied after an oil change. As the old oil is drained, the particles are washed out. The additives can be applied to both new and old oil. Particles always work. The additives can be used in old (vintage) and new, modern and sport bikes.